Tower Crane Rentals and Sales San Diego - Cranes are a popular kind of industrial equipment commonly used in the materials handling industry. These machines may be outfitted with sheaves, a hoist rope, wire ropes or chains. These items allow cranes to lower and lift items vertically while transporting them horizontally. Heavy crates, shipping containers, machinery and similar items can be efficiently moved thanks to a variety of crane models.
Freight Transportation
Cranes are utilized to move items in terms of making loading and unloading easier and safer. The lifting capacity depends on the model. Cranes offer a great job site support and the mechanical advantage of an extended lifting capacity. Cranes are commonly found on construction sites and a variety of industries.
Specified Use
There are different cranes for many applications. Jib cranes can be used for tighter environments including workshops. Extensive tower cranes can be seen in construction. There is the right crane model available for numerous applications. Tight spaces may be more accessible with the use of cranes. Floating cranes can be utilized for maritime applications such as salvaging sunken items or on oil rigs.
Tower Cranes
This type of crane is fixed on a concrete slab to the ground. This model is commonly attached to the sides of structures. It offers precise height and lifting reliability. Popular for building tall commercial buildings and residential structures, the base is mounted to the mast to create even further reach once extended. The mast is connected to the slewing unit of the crane that enables it to rotate. Above the slewing component, the operator cab is situated, along with the long horizontal jib and the counter jib.
The majority of the load is carried via the long horizontal jib. The counter-jib creates the counterweight and it may rely on concrete blocks. The jib handles the load to and from the center of the crane. Normally the crane operator stays inside of a cab found on top of the tower attached to the turntable; although, it may be mounted on the jib instead. Operators can use a radio remote control unit from the ground. Electric motors are used to operate the lifting hook and control wire rope cables located within a sheaves system. The long horizontal arm houses the cargo hook and its’ motor. The operator commonly works together with a rigger to safely hook and unhook loads. Daily safety requires many important hand signals. The rigger determines the crane’s lifting schedule and is responsible to make sure everything load and rigging wise is reliable and safe.
Truck-Mounted Cranes
Truck mounted cranes consist of two parts including the boom and the carrier. These two items have a turntable to attach them, allowing the higher portion the ability to swing from side-to-side. Modern hydraulic truck cranes are generally single-engine machines. The same engine is responsible for providing power to the crane and the undercarriage. Hydraulics are necessary for delivering power to the upper portion of the crane through the turntable located from the pump attached to the bottom portion. Original, older hydraulic crane truck models commonly featured dual engines. The first engine enabled the crane to travel down the road while the second engine controlled the hydraulic pump for the outriggers and jacks. Some operators prefer the older dual-engine models since there are often turntable leaks many newer units.
Cranes commonly have to travel via roads to get to different jobs. This can eliminate industrial transportation requirements unless the crane is sizeable with certain weight restrictions. Local laws may be in place regarding transportation. Typically, larger cranes are outfitted with trailers to help distribute the load over numerous axles. There are some crane models that can be taken apart to accommodate particular requirements. Typically, another truck with the disassembled counterweights will follow the crane.
Outriggers & Stability
Outriggers horizontally extend from the cranes’ chassis to provide stability. Vertical stability is achieved by the outriggers to keep the machine level while completing hoisting and stationary applications. Specific crane truck models can slowly travel with a suspended load. Care is given to ensure the load doesn’t swing during travel. Most of the anti-tipping capability is related to how stiff the chassis suspension is. Counterweights can be moved and adjusted on certain models to enhance stabilization even more than what the outriggers deliver. Suspended loads are among the most stable due to the majority of the crane’s weight acting as a counterweight. Safeguards are in place electronically to monitor the maximum safe loads for traveling speeds and stationary work.
Overhead and Bridge Cranes
A bridge crane is a type of overhead crane. This concept features a hook-and-line mechanism and a crane with a horizontal beam that is made to run along rails. This type of crane resembles a gantry crane. They are common within factory buildings and attach to rails that run down two walls. Cranes can be made with single or double beam construction and may rely on complex box girders or regular steel beams. Some overhead cranes have the capacity to be operated with a control pendant. Locations requiring heavy lifting from ten tons and higher may use a double girder bridge. The box girder design creates a system featuring higher system integrity with a lower deadweight. Cargo can be lifted with a hoist and the trolley that can travel along the bridge along with the bridge component covered by the crane.
The steel industry relies on overhead cranes for much of the manufacturing. Steel is typically handled by an overhead crane until it leaves the factory as a finished piece. From raw materials to pouring hot steel and moving finished product, overhead cranes handle steel at every stage. Steel items are moved onto trucks via overhead cranes. Metal fabricators and stampers and the automobile industry rely on these machines.
Pulp & Paper Mills
Bridge cranes are often relied on for regular pulp mill maintenance including removing equipment such as heavy press rolls. Bridge cranes utilized in paper machine construction help to install large apparatus’ and equipment including huge components such as cast-iron paper drying drums and similar items.
Loader Crane
Powered electrically with an articulated arm attached to a truck or trailer, specific for loading and unloading, the loader crane has numerous joints to allow the machine to be folded into a small space between uses. These telescoping abilities are useful. Some models can even load or stow themselves on their own without any operator intervention. The operator can move around the machine in order to view the load. Current models often feature a portable cabled control system or radio-linked system that works beside hydraulic controls that are mounted on the crane.
Gantry Crane
A gantry crane features a hoist located on a trolley running horizontally along rails, often fitted on two beams or a single beam or in a fixed machinery house. The crane frame is supported via beams and wheels on a gantry system and runs on the gantry rail which is generally perpendicular to the trolley direction of travel. The gantry cranes are available in numerous sizes. Some models can move extremely heavy loads for industrial and shipyard applications.
Tower Cranes PDF
