Change a Propane Tank
Propane fueled forklifts are commonly utilized in warehouses. The lift truck is made with the propane tank mounted behind the operator. The tanks, which look much like beer kegs, have to be replaced periodically as they have a limited lifespan. Drivers of forklifts must always utilize caution when handling propane tanks. Compressed gases are hazardous, specially because the gas is flammable. Utilize caution when replacing and removing propane tank to avoid injury.
1 To change a propane tank, first stop the forklift and leave the engine running, and turn the valve on the tank off. Let the forklift run until the engine dies. This procedure burns the gas off inside the transfer hose that connects the tank and the engine. Prior to taking the second steps, wear the proper safety equipment, like insulated gloves made of either neoprene or leather. It is important for you to protect your skin from contact with the compressed gas, that is extremely cold.
2 The tank hose has to be disconnected, followed by removing the tank from its holding straps. When putting in a new tank, tighten the nut to reattach the holding straps and to reconnect the hose at the valve of the tank.
3 You could check for leaks by applying soapy water to the valve and opening it slightly. Leaking gas would cause bubbles to foam around the value. If this occurs, check the valve area and the connection hose at the nut. The connecting nut should be re-tightened if you detect any leaks around the area of the valve, and after that do the leak inspection process again. Persistent leaks mean that both the nut and connecting hose must be replaced. However, if replacing the nut and hose still does not stop the leak, the tank should be replaced.
4 Finally, open the valve all the way to allow the gas to fill the connecting hose. Afterward you can start the lift truck and resume working.